Mémoires de Fin d’Etudes
Etablissement
Université de M’Sila - Mohamed Boudiaf
Affiliation
Institut de Chimie
Auteur
MOHAMMEDI, Nadia
Directeur de thèse
N. HADDAOUI
Filière
Chimie
Diplôme
Magister
Titre
Préparation et caractérisation d’un nanocomposite à base de polypropylène et d’une argile locale : la montmorillonite de Maghnia
Mots clés
MOTS CLE : nanocomposite; Feuillets de silicates ; extrusion réactive ; anhydride maléique greffé sur le polypropylène ; master batch KEY WORDS: nanocomposite; nanofillers; reactive extrusion;polypropylene-graft-maleic anhydride; masterbatch.
Résumé
ملخص قمنا من خلال هذه الدراسة بتحضير مركب نانومتري بطريقة الإنصهار الهدف هو تحديد بعض المعايير التي تعمل كمفاتيح لتحضيره بخصائص ميكانيكية محسنة بكمية طين لا تتجاوز ℅ 5 هذا المركب هو البولي بروبلين بإضافة عون التجانس و هو البولي بروبلين المتغيربالاندريد مالييك و إضافة أيضا الطين الصلصالي بطريقتين مباشرة و عن طريق الماسترباتشر. هذه المركبات النانومترية تم تحضيرها بطين صلصالي معالج برباعي الكلور امونيوم و آخر غير معالج. بينت النتائج تحسن الخصائص الميكانكية مثل معامل المرونة ومقاومة الصدم بالطريقة المباشرة على عكس الماسترباتشر، لاحظنا أيضا نقص مؤشر السيولة وتحسن اللزوجة بزيادة كمية المنتموريونيت في كلتا الطريقتين. RESUME L’objectif de notre étude est de cerner quelques paramètres qui opéreront en clé pour l’obtention d’un nanocomposite polypropylène-montmorillonite (PP/MMT) par intercalation à l’état fondu avec une charge dont le taux ne dépasse pas les 5℅ en utilisant cette voie par deux méthodes l’une directe et l’autre par masterbatch .Un polypropylène fonctionnalisé anhydride maléique (PP-g-MA) a été utilisé comme compatibilisant afin d’améliorer la qualité de la dispersion avec une montmorillonite non traitée sodique MMTsodique et celle traitée par le chlorure de Tétrabutyl-ammonium (CTBA-MMT). La formation et les propriétés des interfaces PP/PP-g-MAH/MMT ont été étudiées à travers leurs propriétés mécaniques, rhéologiques, spectroscopiques et par la diffraction de rayon X(DRX) .L’effet de la concentration de PP-g-MA et des conditions opératoires a été examiné. L’intercalation du produit organique a montré une augmentation de la distance interfoliaire.Les résultats des propriétés mécaniques ont montré que Pour la montmorillonite non traitée la méthode directe a démontrée une amélioration du module de Young par rapport à la méthode masterbatch. Les propriétés rhéologiques ont montré aussi une diminution de l’indice de fluidité avec une augmentation de la viscosité par l’introduction de la montmorillonite dans les deux transformations directe et par masterbatch. ABSTRACT The objective of our study is to determine some parameters which will operate out of key for obtaining a nanocomposite polypropylene-montmorillonite (PP/MMT) via melt intercalation, with MMT loading which does not exceed the 5℅ using two transformations direct transformation and master batch.The maleic anhydride grafted polypropylene (PPg- MAH) was used to improve the dispersibility of the clay by using sodium-MMT untreated montmorillonite and that treated by chloride Tétrabutylammonium (CTBAMMT). The formation and the properties of interface PP/PP-g-MAH/MMT are studied through the mechanical properties, as well as melt rheology, spectroscopical and X-ray diffraction. The effects of concentration of PP-g-MA and processing parameters were investigated. The intercalation of organic compound showed an increase in the basal spacing .The results of the mechanical properties showed that the direct method involves an improvement of the Young modulus compared to the method masterbatch. The rheological properties also showed a reduction in the melt flow index (MFI) with an increase in viscosity by the introduction of montmorillonite into the two transformations direct and by masterbatch.
Pagination
132
Format
pdf
Statut
Traitée